CAMERA & DETECTORS

Laser Beamprofiler

WinCamD seies // MWIR-FIR Beam Profiler

The WinCamD-IR-BB is an imaging solution for lasers in the MWIR and FIR range. With 17 µm pixels, a wavelength range of 2-16µm, and an integrated shutter, the WinCamD-IR-BB offers unparalleled beam profiling capabilities. With a signal-to-noise ratio that exceeds 1000:1, the WinCamD-IR-BB is capable of ISO 11146 compliant beam measurements. The microbolometer-based camera features very high sensitivity, and the integrated shutter allows for fully automated non-uniformity correction.

The WinCamD-IR-BB is supported by DataRay’s full-featured, highly customizable, user-centric software which has no license fees, unlimited installations, and free software updates. The software supports M² measurements using our M2DU stages. For higher power lasers, DataRay offers a range of sampling, absorbing, and reflecting attenuators for use with beam powers exceeding the camera’s maximum power limits.

Catalogue
Features
  • Broadband 2 to 16 µm VOx microbolometer
  • 640 x 480, 10.88 x 8.16 mm active area
  • 17 µm pixels
  • Port-powered USB 3.0, 3 m screw locking cable
  • 30 FPS update rate (7.5 FPS for export)
  • Integrated shutter for automated NUC
  • 14-bit ADC
  • 14 ms time constant – Pulsed lasers with PRR = 1 kHz appear as CW
  • No chopper/TEC
  • Parallel capture on multiple cameras
  • M² measurements
Key Applications
  • MWIR/FIR/CO₂ laser profiling
  • Field servicing of MWIR/FIR/CO₂ lasers and laser-based systems
  • Optical assembly & instrument alignment
  • Beam wander & logging
  • M² measurement with available M2DU stage
Key Specifications